fixed a few minor bugs

qse/cmd/awk/asm.awk

@@ -1,52 +0,0 @@
-#
-# $Id: asm.awk,v 1.4 2007/09/27 11:33:45 bacon Exp $
-#
-# Taken from the book "The AWK Programming Language"
-# aseawk++ -si asm.awk -a asm.s -nostripspaces -baseone
-#
-
-BEGIN {
-	srcfile = ARGV[1];
-	ARGV[1] = "";
-	tempfile = "asm.temp";
-	n = split("const get put ld st add sub jpos jz j halt", x);
-	for (i = 1; i <= n; i++) op[x[i]] = i - 1;
-
-# PASS 1
-	FS = "[ \t]+";
-	while (getline <srcfile > 0) {
-		sub (/#.*/, "");
-		symtab[$1] = nextmem;
-
-		if ($2 != "") {
-			print $2 "\t" $3 >tempfile;
-			nextmem++;
-		}	
-	}
-	close (tempfile);
-
-# PASS 2
-	nextmem = 0;
-	while (getline <tempfile > 0) {
-		if ($2 !~ /^[0-9]*$/) $2 = symtab[$2];
-		mem[nextmem++] = 1000 * op[$1] + $2;
-	}
-
-# INTERPRETER
-	for (pc = 0; pc >= 0; ) {
-		addr = mem[pc] % 1000;
-		code = int(mem[pc++] / 1000);
-		if      (code == op["get"])  { if (getline acc <= 0) acc = 0; }
-		else if (code == op["put"])  { print acc; }
-		else if (code == op["st"])   { mem[addr] = acc; }
-		else if (code == op["ld"])   { acc = mem[addr]; }
-		else if (code == op["add"])  { acc += mem[addr]; }
-		else if (code == op["sub"])  { acc -= mem[addr]; }
-		else if (code == op["jpos"]) { if (acc > 0) pc = addr; }
-		else if (code == op["jz"])   { if (acc == 0) pc = addr; }
-		else if (code == op["j"])    { pc = addr; }
-		else if (code == op["halt"]) { pc = -1; }
-		else                         { pc = -1; }
-	}
-}
-

qse/cmd/awk/cou-001.out

@@ -1,15 +0,0 @@
-{
-	print $1,$3;
-}
-
-USSR 275
-Canada 25
-China 1032
-USA 237
-Brazil 134
-India 746
-Mexico 78
-France 55
-Japan 120
-Germany 61
-England 56

qse/cmd/awk/cou-002.out

@@ -1,29 +0,0 @@
-BEGIN {
-	FS = "	";
-	printf ("%10s %6s %5s    %s\n\n","COUNTRY","AREA","POP","CONTINENT");
-}
-
-{
-	printf ("%10s %6d %5d    %s\n",$1,$2,$3,$4);
-	area = (area + $2);
-	pop = (pop + $3);
-}
-
-END {
-	printf ("\n%10s %6d %5d\n","TOTAL",area,pop);
-}
-   COUNTRY   AREA   POP    CONTINENT
-
-      USSR   8649   275    Asia
-    Canada   3852    25    North America
-     China   3705  1032    Asia
-       USA   3615   237    North America
-    Brazil   3286   134    South America
-     India   1267   746    Asia
-    Mexico    762    78    North America
-    France    211    55    Europe
-     Japan    144   120    Asia
-   Germany     96    61    Europe
-   England     94    56    Europe
-
-     TOTAL  25681  2819

qse/cmd/awk/cou-003.out

@@ -1,6 +0,0 @@
-(($3 / $2) >= 0.5)
-
-India	1267	746	Asia
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-004.out

@@ -1,5 +0,0 @@
-($0 >= "M")
-
-USSR	8649	275	Asia
-USA	3615	237	North America
-Mexico	762	78	North America

qse/cmd/awk/cou-005.out

@@ -1,6 +0,0 @@
-($1 < $4)
-
-Canada	3852	25	North America
-Brazil	3286	134	South America
-Mexico	762	78	North America
-England	94	56	Europe

qse/cmd/awk/cou-006.out

@@ -1,5 +0,0 @@
-($2 < $3)
-
-India	1267	746	Asia
-Mexico	762	78	North America
-France	211	55	Europe

qse/cmd/awk/cou-007.out

@@ -1,6 +0,0 @@
-/Asia/
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-Japan	144	120	Asia

qse/cmd/awk/cou-008.out

@@ -1,6 +0,0 @@
-($4 ~ /Asia/)
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-Japan	144	120	Asia

qse/cmd/awk/cou-009.out

@@ -1,9 +0,0 @@
-($4 !~ /Asia/)
-
-Canada	3852	25	North America
-USA	3615	237	North America
-Brazil	3286	134	South America
-Mexico	762	78	North America
-France	211	55	Europe
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-010.out

@@ -1,6 +0,0 @@
-($0 ~ /Asia/)
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-Japan	144	120	Asia

qse/cmd/awk/cou-011.out

@@ -1,2 +0,0 @@
-($2 !~ /^[0-9]+$/)
-

qse/cmd/awk/cou-012.out

@@ -1,4 +0,0 @@
-(($4 == "Asia") && ($3 > 500))
-
-China	3705	1032	Asia
-India	1267	746	Asia

qse/cmd/awk/cou-013.out

@@ -1,9 +0,0 @@
-(($4 == "Asia") || ($4 == "Europe"))
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-France	211	55	Europe
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-014.out

@@ -1,9 +0,0 @@
-($4 ~ /^(Asia|Europe)$/)
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-France	211	55	Europe
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-015.out

@@ -1,9 +0,0 @@
-(/Asia/ || /Europe/)
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-France	211	55	Europe
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-016.out

@@ -1,9 +0,0 @@
-/Asia|Europe/
-
-USSR	8649	275	Asia
-China	3705	1032	Asia
-India	1267	746	Asia
-France	211	55	Europe
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-017.out

@@ -1,5 +0,0 @@
-/Canada/,/USA/
-
-Canada	3852	25	North America
-China	3705	1032	Asia
-USA	3615	237	North America

qse/cmd/awk/cou-018.out

@@ -1,2 +0,0 @@
-/Eurpoe/,/Africa/
-

qse/cmd/awk/cou-019.out

@@ -1,9 +0,0 @@
-(FNR == 1),(FNR == 5) {
-	print ((FILENAME   ": ")   $0);
-}
-
-cou-en.data: USSR	8649	275	Asia
-cou-en.data: Canada	3852	25	North America
-cou-en.data: China	3705	1032	Asia
-cou-en.data: USA	3615	237	North America
-cou-en.data: Brazil	3286	134	South America

qse/cmd/awk/cou-020.out

@@ -1,9 +0,0 @@
-(FNR <= 5) {
-	print ((FILENAME   ": ")   $0);
-}
-
-cou-en.data: USSR	8649	275	Asia
-cou-en.data: Canada	3852	25	North America
-cou-en.data: China	3705	1032	Asia
-cou-en.data: USA	3615	237	North America
-cou-en.data: Brazil	3286	134	South America

qse/cmd/awk/cou-021.out

@@ -1,8 +0,0 @@
-($4 == "Asia") {
-	print $1,(1000 * $2);
-}
-
-USSR 8649000
-China 3705000
-India 1267000
-Japan 144000

qse/cmd/awk/cou-022.out

@@ -1,27 +0,0 @@
-BEGIN {
-	FS = OFS = "	";
-}
-
-($4 == "North America") {
-	$4 = "NA";
-}
-
-($4 == "South America") {
-	$4 = "SA";
-}
-
-{
-	print;
-}
-
-USSR	8649	275	Asia
-Canada	3852	25	NA
-China	3705	1032	Asia
-USA	3615	237	NA
-Brazil	3286	134	SA
-India	1267	746	Asia
-Mexico	762	78	NA
-France	211	55	Europe
-Japan	144	120	Asia
-Germany	96	61	Europe
-England	94	56	Europe

qse/cmd/awk/cou-023.out

@@ -1,20 +0,0 @@
-BEGIN {
-	FS = OFS = "	";
-}
-
-{
-	$5 = ((1000 * $3) / $2);
-	print;
-}
-
-USSR	8649	275	Asia	31.7956
-Canada	3852	25	North America	6.49013
-China	3705	1032	Asia	278.543
-USA	3615	237	North America	65.5602
-Brazil	3286	134	South America	40.7791
-India	1267	746	Asia	588.792
-Mexico	762	78	North America	102.362
-France	211	55	Europe	260.664
-Japan	144	120	Asia	833.333
-Germany	96	61	Europe	635.417
-England	94	56	Europe	595.745

qse/cmd/awk/cou-024.out

@@ -1,9 +0,0 @@
-($4 == "Asia") {
-	pop = (pop + $3);
-	n = (n + 1);
-}
-
-END {
-	print "Total population of the",n,"Asian countries is",pop,"million.";
-}
-Total population of the 4 Asian countries is 2173 million.

qse/cmd/awk/cou-025.out

@@ -1,14 +0,0 @@
-/Asia/ {
-	pop["Asia"] += $3;
-}
-
-/Europe/ {
-	pop["Europe"] += $3;
-}
-
-END {
-	print "Asian population is",pop["Asia"],"million.";
-	print "European population is",pop["Europe"],"million.";
-}
-Asian population is 2173 million.
-European population is 172 million.

qse/cmd/awk/cou-026.out

@@ -1,16 +0,0 @@
-BEGIN {
-	FS = "	";
-}
-
-{
-	pop[$4] += $3;
-}
-
-END {
-	for (name in pop)
-		print name,pop[name];
-}
-Europe 172
-South America 134
-North America 340
-Asia 2173

qse/cmd/awk/cou-027.out

@@ -1,18 +0,0 @@
-BEGIN {
-	FS = "	";
-}
-
-{
-	pop[$4] += $3;
-}
-
-END {
-	for (c in pop)
-		printf ("%15s	%6d\n",c,pop[c]) | "sort -t'	' -k2 -rn";
-	close ("sort -t'	' -k2 -rn");
-	sleep (1);
-}
-           Asia	  2173
-  North America	   340
-         Europe	   172
-  South America	   134

qse/cmd/awk/emp-001.out

@@ -1,8 +0,0 @@
-($3 > 0) {
-	print $1,($2 * $3);
-}
-
-Kathy 40
-Mark 100
-Mary 121
-Susie 76.5

qse/cmd/awk/emp-002.out

@@ -1,6 +0,0 @@
-($3 == 0) {
-	print $1;
-}
-
-Beth
-Dan

qse/cmd/awk/emp-003.out

@@ -1,10 +0,0 @@
-{
-	print NF,$1,$NF;
-}
-
-3 Beth 0
-3 Dan 0
-3 Kathy 10
-3 Mark 20
-3 Mary 22
-3 Susie 18

qse/cmd/awk/emp-004.out

@@ -1,10 +0,0 @@
-{
-	print NR,$0;
-}
-
-1 Beth	4.00	0
-2 Dan	3.74	0
-3 Kathy	4.00	10
-4 Mark	5.00	20
-5 Mary	5.50	22
-6 Susie	4.25	18

qse/cmd/awk/emp-005.out

@@ -1,10 +0,0 @@
-{
-	print "total pay for",$1,"is",($2 * $3);
-}
-
-total pay for Beth is 0
-total pay for Dan is 0
-total pay for Kathy is 40
-total pay for Mark is 100
-total pay for Mary is 121
-total pay for Susie is 76.5

qse/cmd/awk/emp-006.out

@@ -1,10 +0,0 @@
-{
-	printf ("total pay for %s is $%.2f\n",$1,($2 * $3));
-}
-
-total pay for Beth is $0.00
-total pay for Dan is $0.00
-total pay for Kathy is $40.00
-total pay for Mark is $100.00
-total pay for Mary is $121.00
-total pay for Susie is $76.50

qse/cmd/awk/emp-007.out

@@ -1,10 +0,0 @@
-{
-	printf ("%-8s $%6.2f\n",$1,($2 * $3));
-}
-
-Beth     $  0.00
-Dan      $  0.00
-Kathy    $ 40.00
-Mark     $100.00
-Mary     $121.00
-Susie    $ 76.50

qse/cmd/awk/emp-008.out

@@ -1,4 +0,0 @@
-($2 >= 5)
-
-Mark	5.00	20
-Mary	5.50	22

qse/cmd/awk/emp-009.out

@@ -1,7 +0,0 @@
-(($2 * $3) > 50) {
-	printf ("$%.2f for %s\n",($2 * $3),$1);
-}
-
-$100.00 for Mark
-$121.00 for Mary
-$76.50 for Susie

qse/cmd/awk/emp-010.out

@@ -1,3 +0,0 @@
-($1 == "Susie")
-
-Susie	4.25	18

qse/cmd/awk/emp-011.out

@@ -1,3 +0,0 @@
-/Susie/
-
-Susie	4.25	18

qse/cmd/awk/emp-012.out

@@ -1,7 +0,0 @@
-(($2 >= 4) || ($3 >= 20))
-
-Beth	4.00	0
-Kathy	4.00	10
-Mark	5.00	20
-Mary	5.50	22
-Susie	4.25	18

qse/cmd/awk/emp-013.out

@@ -1,11 +0,0 @@
-($2 >= 4)
-
-($3 >= 20)
-
-Beth	4.00	0
-Kathy	4.00	10
-Mark	5.00	20
-Mark	5.00	20
-Mary	5.50	22
-Mary	5.50	22
-Susie	4.25	18

qse/cmd/awk/emp-014.out

@@ -1,7 +0,0 @@
-(!((($2 < 4) && ($3 < 20))))
-
-Beth	4.00	0
-Kathy	4.00	10
-Mark	5.00	20
-Mary	5.50	22
-Susie	4.25	18

qse/cmd/awk/emp-015.out

@@ -1,20 +0,0 @@
-(NF != 3) {
-	print $0,"number of fields is not equal to 3";
-}
-
-($2 < 3.35) {
-	print $0,"rate is below minimum wage";
-}
-
-($2 > 10) {
-	print $0,"rate exceeds $10 per hour";
-}
-
-($3 < 0) {
-	print $0,"negative hours worked";
-}
-
-($3 > 60) {
-	print $0,"too many hours worked";
-}
-

qse/cmd/awk/emp-016.out

@@ -1,17 +0,0 @@
-BEGIN {
-	print "NAME    RATE    HOURS";
-	print "";
-}
-
-{
-	print;
-}
-
-NAME    RATE    HOURS
-
-Beth	4.00	0
-Dan	3.74	0
-Kathy	4.00	10
-Mark	5.00	20
-Mary	5.50	22
-Susie	4.25	18

qse/cmd/awk/emp-017.out

@@ -1,8 +0,0 @@
-($3 > 15) {
-	emp = (emp + 1);
-}
-
-END {
-	print emp,"employees worked more than 15 hours";
-}
-3 employees worked more than 15 hours

qse/cmd/awk/emp-018.out

@@ -1,4 +0,0 @@
-END {
-	print NR,"employees";
-}
-6 employees

qse/cmd/awk/emp-019.out

@@ -1,12 +0,0 @@
-{
-	pay = (pay + ($2 * $3));
-}
-
-END {
-	print NR,"employees";
-	print "total pay is",pay;
-	print "average pay is",(pay / NR);
-}
-6 employees
-total pay is 337.5
-average pay is 56.25

qse/cmd/awk/emp-020.out

@@ -1,9 +0,0 @@
-($2 > maxrate) {
-	maxrate = $2;
-	maxemp = $1;
-}
-
-END {
-	print "highest hourly rage:",maxrate,"for",maxemp;
-}
-highest hourly rage: 5.50 for Mary

qse/cmd/awk/emp-021.out

@@ -1,8 +0,0 @@
-{
-	names = ((names   $1)   " ");
-}
-
-END {
-	print names;
-}
-Beth Dan Kathy Mark Mary Susie 

qse/cmd/awk/emp-022.out

@@ -1,8 +0,0 @@
-{
-	last = $0;
-}
-
-END {
-	print last;
-}
-Susie	4.25	18

qse/cmd/awk/emp-023.out

@@ -1,10 +0,0 @@
-{
-	print $1,length ($1);
-}
-
-Beth 4
-Dan 3
-Kathy 5
-Mark 4
-Mary 4
-Susie 5

qse/cmd/awk/emp-024.out

@@ -1,9 +0,0 @@
-{
-	nc = ((nc + length ($0)) + 1);
-	nw = (nw + NF);
-}
-
-END {
-	print NR,"lines,",nw,"words,",nc,"characters";
-}
-6 lines, 18 words, 77 characters

qse/cmd/awk/emp-025.out

@@ -1,12 +0,0 @@
-($2 > 6) {
-	n = (n + 1);
-	pay = (pay + ($2 * $3));
-}
-
-END {
-	if ((n > 0))
-		print n,"employees, total pay is",pay,"average pay is",(pay / n);
-	else
-		print "no employees are paid more than $6/hour";
-}
-no employees are paid more than $6/hour

qse/cmd/awk/emp-026.out

@@ -1,18 +0,0 @@
-{
-	line[NR] = $0;
-}
-
-END {
-	i = NR;
-	while ((i > 0))
-	{
-		print line[i];
-		i = (i - 1);
-	}
-}
-Susie	4.25	18
-Mary	5.50	22
-Mark	5.00	20
-Kathy	4.00	10
-Dan	3.74	0
-Beth	4.00	0

qse/cmd/awk/emp-027.out

@@ -1,15 +0,0 @@
-{
-	line[NR] = $0;
-}
-
-END {
-	i = NR;
-	for (i = NR; (i > 0); i = (i - 1))
-		print line[i];
-}
-Susie	4.25	18
-Mary	5.50	22
-Mark	5.00	20
-Kathy	4.00	10
-Dan	3.74	0
-Beth	4.00	0

qse/cmd/awk/emp-ko.data

@@ -1,6 +0,0 @@
-베쓰	4.00	0
-단	3.74	0
-케이티	4.00	10
-마크	5.00	20
-메리	5.50	22
-수지	4.25	18

qse/cmd/awk/manifest

@@ -1 +0,0 @@
-Main-Class: QseAwk

qse/cmd/awk/mkjar.bat

@@ -1,8 +0,0 @@
-cd ..\..\..
-move ase\cmd\awk\AwkApplet*.class .
-jar cvf AwkApplet.jar *.class ase\cmd\awk\*.class ase\awk\*.class
-move AwkApplet.jar ase\cmd\awk
-cd ase\cmd\awk
-
-copy ..\..\awk\aseawk_jni.dll .
-jarsigner -keystore ase.store AwkApplet.jar asecert	

qse/cmd/awk/wordfreq.awk

@@ -1,20 +0,0 @@
-# wordfreq.awk --- print list of word frequencies
-     
-{
-	$0 = tolower($0);    # remove case distinctions
-
-	# remove punctuation
-	a=0;
-	gsub(/[^[:alnum:]_[:blank:]]/, " ", $a);
-	#gsub(/[^[:alnum:]_[:blank:]]/, " ");
-
-	for (i = 1; i <= NF; i++) freq[$i]++;
-}
-#/[^kkka-bcx-dd-y]|abc|def/
-  
-END {
-	for (word in freq)
-		print word, freq[word];
-}
-     
-

qse/include/qse/awk/Awk.hpp

@@ -1,5 +1,5 @@
 /*
- * $Id: Awk.hpp 212 2009-06-25 07:39:27Z hyunghwan.chung $
+ * $Id: Awk.hpp 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -509,8 +509,8 @@ public:
 		ERR_FNCUSER = QSE_AWK_EFNCUSER,
 		ERR_FNCIMPL = QSE_AWK_EFNCIMPL,
 		ERR_IOUSER = QSE_AWK_EIOUSER,
-		ERR_IONONE = QSE_AWK_EIONONE,
 		ERR_IOIMPL = QSE_AWK_EIOIMPL,
+		ERR_IONMNF = QSE_AWK_EIONMNF,
 		ERR_IONMEM = QSE_AWK_EIONMEM,
 		ERR_IONMNL = QSE_AWK_EIONMNL,
 		ERR_FMTARG = QSE_AWK_EFMTARG,

qse/include/qse/awk/awk.h

@@ -1,5 +1,5 @@
 /*
- * $Id: awk.h 212 2009-06-25 07:39:27Z hyunghwan.chung $
+ * $Id: awk.h 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -655,8 +655,8 @@ enum qse_awk_errnum_t
 	QSE_AWK_EFNCUSER,          /* wrong intrinsic function implementation */
 	QSE_AWK_EFNCIMPL,          /* intrinsic function handler failed */
 	QSE_AWK_EIOUSER,           /* wrong user io handler implementation */
-	QSE_AWK_EIONONE,           /* no such io name found */
 	QSE_AWK_EIOIMPL,           /* i/o callback returned an error */
+	QSE_AWK_EIONMNF,           /* no such io name found */
 	QSE_AWK_EIONMEM,           /* i/o name empty */
 	QSE_AWK_EIONMNL,           /* i/o name contains '\0' */
 	QSE_AWK_EFMTARG,           /* arguments to format string not sufficient */

qse/lib/awk/err.c

@@ -1,5 +1,5 @@
 /*
- * $Id: err.c 212 2009-06-25 07:39:27Z hyunghwan.chung $
+ * $Id: err.c 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -39,7 +39,7 @@ const qse_char_t* qse_awk_dflerrstr (qse_awk_t* awk, qse_awk_errnum_t errnum)
 		QSE_T("file or data too big"),
 		QSE_T("system too busy"),
 		QSE_T("is a directory"),
-		QSE_T("i/o error"),
+		QSE_T("IO error"),
 
 		QSE_T("cannot open '${0}'"),
 		QSE_T("cannot read '${0}'"),
@@ -143,10 +143,10 @@ const qse_char_t* qse_awk_dflerrstr (qse_awk_t* awk, qse_awk_errnum_t errnum)
 		QSE_T("wrong implementation of intrinsic function handler"),
 		QSE_T("intrinsic function handler returned an error"),
 		QSE_T("wrong implementation of user-defined io handler"),
-		QSE_T("no such io name found"),
+		QSE_T("IO handler returned an error"),
-		QSE_T("i/o handler returned an error"),
+		QSE_T("no such IO name found"),
-		QSE_T("i/o name empty"),
+		QSE_T("IO name empty"),
-		QSE_T("i/o name '${0}' containing a null character"),
+		QSE_T("IO name '${0}' containing a null character"),
 		QSE_T("not sufficient arguments to formatting sequence"),
 		QSE_T("recursion detected in format conversion"),
 		QSE_T("invalid character in CONVFMT"),

qse/lib/awk/fnc.c

@@ -1,5 +1,5 @@
 /*
- * $Id: fnc.c 211 2009-06-24 09:50:10Z hyunghwan.chung $
+ * $Id: fnc.c 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -282,7 +282,7 @@ static int fnc_close (
 
 	n = qse_awk_rtx_closeio (run, name);
 	/*
-	if (n == -1 && run->errinf.num != QSE_AWK_EIONONE)
+	if (n == -1 && run->errinf.num != QSE_AWK_EIONMNF)
 	{
 		if (a0->type != QSE_AWK_VAL_STR) 
 			QSE_AWK_FREE (run->awk, name);
@@ -316,13 +316,13 @@ static int flush_io (
 		{
 			/*
 			if (run->errinf.num == QSE_AWK_EIOIMPL) n = -1;
-			else if (run->errinf.num == QSE_AWK_EIONONE) 
+			else if (run->errinf.num == QSE_AWK_EIONMNF) 
 			{
 				if (n != 0) n = -2;
 			}
 			else n = -99; 
 			*/	
-			if (run->errinf.num == QSE_AWK_EIONONE) 
+			if (run->errinf.num == QSE_AWK_EIONMNF) 
 			{
 				if (n != 0) n = -2;
 			}

qse/lib/awk/parse.c

@@ -1,5 +1,5 @@
 /*
- * $Id: parse.c 212 2009-06-25 07:39:27Z hyunghwan.chung $
+ * $Id: parse.c 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -3039,11 +3039,15 @@ static qse_awk_nde_t* parse_primary (qse_awk_t* awk, qse_size_t line)
 		{
 			qse_awk_nde_t* tmp;
 
+			do
+			{
 				if (get_token(awk) <= -1) 
 				{
 					qse_awk_clrpt (awk, nde);
 					return QSE_NULL;
 				}	
+			}
+			while (MATCH(awk,TOKEN_NEWLINE));
 
 			tmp = parse_expression (awk, awk->token.line);
 			if (tmp == QSE_NULL) 
@@ -4635,7 +4639,8 @@ static int get_token (qse_awk_t* awk)
 	}	
 	else if (c == QSE_T('\n')) 
 	{
-		ADD_TOKEN_CHAR (awk, QSE_T('\n'));
+		/*ADD_TOKEN_CHAR (awk, QSE_T('\n'));*/
+		ADD_TOKEN_STR (awk, QSE_T("<NL>"), 4);
 		SET_TOKEN_TYPE (awk, TOKEN_NEWLINE);
 		GET_CHAR (awk);
 	}

qse/lib/awk/rio.c

@@ -1,5 +1,5 @@
 /*
- * $Id: rio.c 207 2009-06-22 13:01:28Z hyunghwan.chung $
+ * $Id: rio.c 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -634,7 +634,7 @@ int qse_awk_rtx_flushio (
 	if (ok) return 0;
 
 	/* there is no corresponding rio for name */
-	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONONE);
+	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONMNF);
 	return -1;
 }
 
@@ -844,7 +844,7 @@ int qse_awk_rtx_closio_read (
 	}
 
 	/* the name given is not found */
-	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONONE);
+	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONMNF);
 	return -1;
 }
 
@@ -903,7 +903,7 @@ int qse_awk_rtx_closio_write (
 		p = p->next;
 	}
 
-	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONONE);
+	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONMNF);
 	return -1;
 }
 
@@ -945,7 +945,7 @@ int qse_awk_rtx_closeio (qse_awk_rtx_t* run, const qse_char_t* name)
 		p = p->next;
 	}
 
-	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONONE);
+	qse_awk_rtx_seterrnum (run, QSE_AWK_EIONMNF);
 	return -1;
 }
 

qse/lib/awk/run.c

@@ -1,5 +1,5 @@
 /*
- * $Id: run.c 210 2009-06-24 08:29:33Z hyunghwan.chung $
+ * $Id: run.c 213 2009-06-26 13:05:19Z hyunghwan.chung $
  *
    Copyright 2006-2009 Chung, Hyung-Hwan.
 
@@ -2934,6 +2934,9 @@ static int run_print (qse_awk_rtx_t* run, qse_awk_nde_print_t* nde)
 		return -1;
 	}
 
+	/* unlike printf, flushio() is not needed here as print 
+	 * inserts <NL> that triggers auto-flush */
+
 	if (out != QSE_NULL) QSE_AWK_FREE (run->awk, out);
 
 /*skip_write:*/
@@ -3069,10 +3072,13 @@ static int run_printf (qse_awk_rtx_t* run, qse_awk_nde_print_t* nde)
 	}
 	qse_awk_rtx_refdownval (run, v);
 
-	if (out != QSE_NULL) QSE_AWK_FREE (run->awk, out);
 
 /*skip_write:*/
-	return qse_awk_rtx_flushio (run, nde->out_type, dst);
+	n = qse_awk_rtx_flushio (run, nde->out_type, dst);
+
+	if (out != QSE_NULL) QSE_AWK_FREE (run->awk, out);
+
+	return n;
 }
 
 static int output_formatted (
@@ -4045,7 +4051,7 @@ static int __cmp_int_str (
 	qse_awk_rtx_valtostr_out_t out;
 	int n;
 
-	if (rtx->awk->option & QSE_AWK_NCMPONSTR)
+	if (rtx->awk->option & QSE_AWK_NCMPONSTR || right->nstr > 0)
 	{
 		qse_long_t ll;
 		qse_real_t rr;
@@ -4131,7 +4137,7 @@ static int __cmp_real_str (
 	qse_awk_rtx_valtostr_out_t out;
 	int n;
 
-	if (rtx->awk->option & QSE_AWK_NCMPONSTR)
+	if (rtx->awk->option & QSE_AWK_NCMPONSTR || right->nstr > 0)
 	{
 		const qse_char_t* end;
 		qse_real_t rr;

qse/regress/awk/asm.d1

@@ -1,14 +0,0 @@
-	ld	zero   # initialize sum to zero
-	st	sum
-loop	get            # read a number
-	jz	done   # no more input if number is zero
-	add	sum    # add in accumulated sum
-	st	sum    # store new value back in sum
-	j	loop   # go back and read another number
-
-done	ld	sum    # print sum
-	put
-	halt
-
-zero	const	0
-sum	const

qse/regress/awk/emp.d

@@ -1,6 +0,0 @@
-Beth	4.00	0
-Dan	3.74	0
-Kathy	4.00	10
-Mark	5.00	20
-Mary	5.50	22
-Susie	4.25	18

qse/regress/awk/indent.awk

@@ -0,0 +1,56 @@
+#.H1 indent.awk
+#.H2 Synopsis
+#.P gawk -f indent.awk file.sh
+#.H2 Download
+#.P Download from <a href="http://lawker.googlecode.com/svn/fridge/lib/awk/indent.awk">LAWKER</a>
+#.h2 Description
+#.P
+# This is part of Phil's AWK tutorial at 
+#<a href="http://www.bolthole.com/AWK.html">http://www.bolthole.com/AWK.html</a>.
+# This program adjusts the indentation level based on which keywords are
+# found in each line it encounters.
+#.h2 Code
+#.H3 doindent
+#.PRE
+function doindent(){
+	tmpindent=indent;
+	if(indent<0){
+		print "ERROR; indent level == " indent
+	}
+	while(tmpindent >0){
+		printf("    ");
+		tmpindent-=1;
+	}
+}
+#./PRE
+#.H3 Out-denting
+#.PRE
+$1 == "done" 	{ indent -=1; }
+$1 == "fi" 	{ indent -=1; }
+$0 ~ /^}$/	{ if(indent!=0) indent-=1;  }
+#./PRE
+#.H3 Worker
+#.P
+# This is the 'default' action, that actually prints a line out.
+# This gets called AS WELL AS any other matching clause, in the
+# order they appear in this program.
+# An "if" match is run AFTER we run this clause.
+# A "done" match is run BEFORE we run this clause.
+#.PRE
+		{ 
+		  doindent();
+		  print $0;
+		}
+#./PRE
+#.H3 In-denting
+#.PRE
+$0 ~ /if.*;[ ]*then/	{ indent+=1; }
+$0 ~ /for.*;[ ]*do/	{ indent+=1; }
+$0 ~ /while.*;[ ]*do/	{ indent+=1; }
+
+$1 == "then"		{ indent+=1; }
+$1 == "do"		{ indent+=1; }
+$0 ~ /^{$/		{ indent+=1; }
+#./PRE
+#.H2 Author
+#.P Philip Brown  phil@bolthole.com