fixed wrong declaration of os/2 api functions

qse/doc/page/awk-lang.md

@@ -677,37 +677,89 @@ PEER: ?好!
 Note that 你 has been converted to a question mark since the letter is
 not supported by cp949.
 
+## Built-in I/O ##
 
-## Built-in Functions ##
+QSEAWK comes with built-in I/O commands and functions in addition to the 
+implicit input streams for pattern-action blocks. The built-in I/O facility 
+is available only if QSEAWK is set with #QSE_AWK_RIO.
 
-QSEAWK provides the following built-in functions.
+### getline ###
+	
+The *getline* command has multiple forms of usage. It can be used with or 
+without a variable name and can also be associated with a pipe or a file 
+redirection. Basically, it reads a record from an input stream associated 
+and stores it.
+
+*getline* without a following variable reads a record from an associated
+input stream and updates $0 with the value. It also updates *NF*, *FNR*, *NR*.
+The sample below reads records from the console and prints them. 
+
+    BEGIN {
+        while (getline > 0) print $0;
+    }
+
+It is equivalent to 
+
+    { print $0 } 
+
+but performs the task in the *BEGIN* block.
+
+*getline* with a variable reads a record from an associated input stream
+and updates the variable with the value. It updates *FNR* and *NR*, too.
+
+    BEGIN {
+        while (getline line > 0) print line;
+    }
+
+*getline* is associated with the console by default. you can change it
+to a file or a pipe by using |, ||, <.
+
+The *getline* command acts like a function in that it returns a value: 1 on 
+success, 0 on EOF, -1 on error. But you can't place an empty parentheses
+when no variable name is specified nor can you parenthesize the optional 
+variable name. For example, *getline(a)* is different from *getline a* and 
+means the concatenation of the return value of *getline* and the variable *a*.
+
+### print ###
+
+### printf ###
 
 ### setioattr (io-name, attr-name, attr-value) ###
 
-It changes the I/O attribute of the name attr-name to the value attr-value 
+The *setioattr* function changes the I/O attribute of the name *attr-name* to 
-for an I/O stream identified by io-name. It returns 0 on success and -1 on 
+the value *attr-value* for a stream identified by *io-name*. It returns 0 on 
-failure.
+success and -1 on failure.
 
-- io-name is a source or target name used in getline, print, printf combined
+ - *io-name* is a source or target name used in *getline*, *print*, *printf* 
-  with |, ||, >, <, >>.
+   combined with |, ||, >, <, >>.
-- attr-name is one of codepage, ctimeout, atimeout, rtimeout, wtimeout.
+ - *attr-name* is one of *codepage*, *ctimeout*, *atimeout*, *rtimeout*, 
-- attr-value varies depending on attr-name.
+   *wtimeout*.
--- codepage: cp949, cp950, utf8
+ - *attr-value* varies depending on *attr-name*.
--- ctimeout, atimeout, rtimeout, wtimeout: the number of seconds. applies to socket based stream only. you may use a floating-point number for lower resoluation than a second. a negative value turns off timeout. 
+   + codepage: *cp949*, *cp950*, *utf8*
+   + ctimeout, atimeout, rtimeout, wtimeout: the number of seconds. effective 
+    on socket based streams only. you may use a floating-point number for 
+    lower resoluation than a second. a negative value turns off timeout. 
 
-#
+See this sample that prints the contents of a document encoded in cp949.
-# Convert a document encoded in cp949 to a current codepage
+
-#
+    BEGIN { 
-BEGIN 
+        setioattr ("README.TXT", "codepage", "cp949"); 
-{ 
+        while ((getline x < "README.TXT") > 0) print x; 
-	setioattr ("README.INS", "codepage", "cp949"); 
-	while ((getline x < "README.INS") > 0) print x; 
     }
 
-### getioattr (io-name, attr-name) ###
+### getioattr (io-name, attr-name, attr-value) ###
 
-It returns the current attribute value of the attribute named attr-name for
+The getioattr() function retrieves the current attribute value of the attribute
-the stream identified by io-name. See setioattr for description on io-name and
+named *attr-name* for the stream identified by *io-name*. The value retrieved 
-attr-name. It returns the attribute value on success and -1 on failure.
+is set to the variable referenced by *attr-value*. See *setioattr* for 
+description on *io-name* and *attr-name*. It returns 0 on success and -1 on 
+failure.
+
+    BEGIN { 
+        setioattr ("README.TXT", "codepage", "cp949"); 
+        if (getioattr ("README.TXT", "codepage", codepage) <= -1)
+            print "codepage unknown";
+        else print "codepage: " codepage;
+    }
 
 [awkbook]: http://cm.bell-labs.com/cm/cs/awkbook/ 

qse/lib/cmn/fio.c

@@ -59,31 +59,44 @@ enum
 #include "syserr.h"
 IMPLEMENT_SYSERR_TO_ERRNUM (fio, FIO)
 
-#if defined(__OS2__)
+#if defined(_WIN32)
 
-typedef APIRET (*DosOpenLType) (
+typedef DWORD WINAPI (*getmappedfilename_t) (
-	PSZ pszFileName, PHFILE pHf, PULONG pulAction,
+	HANDLE hProcess,
-	LONGLONG cbFile, ULONG ulAttribute,
+	LPVOID lpv,
-	ULONG fsOpenFlags, ULONG fsOpenMode,
+	LPTSTR lpFilename,
+	DWORD nSize
+);
+
+#elif defined(__OS2__)
+
+typedef APIRET APIENTRY (*dosopenl_t) (
+	PSZ pszFileName,
+	PHFILE pHf,
+	PULONG pulAction,
+	LONGLONG cbFile,
+	ULONG ulAttribute,
+	ULONG fsOpenFlags,
+	ULONG fsOpenMode,
 	PEAOP2 peaop2
 );
 
-typedef APIRET (*DosSetFilePtrLType) (
+typedef APIRET APIENTRY (*dossetfileptrl_t) (
 	HFILE hFile,
 	LONGLONG ib,
 	ULONG method,
 	PLONGLONG ibActual
 );
 
-typedef APIRET (*DosSetFileSizeLType) (
+typedef APIRET APIENTRY (*dossetfilesizel_t) (
 	HFILE hFile,
 	LONGLONG cbSize
 );
 
 static int dos_set = 0;
-static DosOpenLType dos_open_l = QSE_NULL;
+static dosopenl_t dos_open_l = QSE_NULL;
-static DosSetFilePtrLType dos_set_file_ptr_l = QSE_NULL;
+static dossetfileptrl_t dos_set_file_ptr_l = QSE_NULL;
-static DosSetFileSizeLType dos_set_file_size_l = QSE_NULL;
+static dossetfilesizel_t dos_set_file_size_l = QSE_NULL;
 
 #endif
 
@@ -1309,13 +1322,6 @@ static int get_devname_from_handle (
 	void* mem = NULL;
 	DWORD olen;
 	HINSTANCE psapi;
-
-	typedef DWORD (WINAPI*getmappedfilename_t) (
-		HANDLE hProcess,
-		LPVOID lpv,
-		LPTSTR lpFilename,
-		DWORD nSize
-	);
 	getmappedfilename_t getmappedfilename;
 
 	/* try to load psapi.dll dynamially for