integrating test scripts

Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -165,8 +165,8 @@ am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/ac/ar-lib \
 	$(top_srcdir)/ac/compile $(top_srcdir)/ac/config.guess \
 	$(top_srcdir)/ac/config.sub $(top_srcdir)/ac/install-sh \
 	$(top_srcdir)/ac/ltmain.sh $(top_srcdir)/ac/missing ac/ar-lib \
-	ac/compile ac/config.guess ac/config.sub ac/depcomp \
+	ac/compile ac/config.guess ac/config.sub ac/install-sh \
-	ac/install-sh ac/ltmain.sh ac/missing
+	ac/ltmain.sh ac/missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -582,6 +582,10 @@ dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__post_remove_distdir)
 
+dist-zstd: distdir
+	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+	$(am__post_remove_distdir)
+
 dist-tarZ: distdir
 	@echo WARNING: "Support for distribution archives compressed with" \
 		       "legacy program 'compress' is deprecated." >&2
@@ -624,6 +628,8 @@ distcheck: dist
 	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
+	*.tar.zst*) \
+	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
 	esac
 	chmod -R a-w $(distdir)
 	chmod u+w $(distdir)
@@ -801,18 +807,18 @@ uninstall-am:
 	am--refresh check check-am clean clean-cscope clean-generic \
 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
 	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-generic \
+	dist-xz dist-zip dist-zstd distcheck distclean \
-	distclean-libtool distclean-local distclean-tags \
+	distclean-generic distclean-libtool distclean-local \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	html-am info info-am install install-am install-data \
+	dvi-am html html-am info info-am install install-am \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-data install-data-am install-dvi install-dvi-am \
-	install-exec-am install-html install-html-am install-info \
+	install-exec install-exec-am install-html install-html-am \
-	install-info-am install-man install-pdf install-pdf-am \
+	install-info install-info-am install-man install-pdf \
-	install-ps install-ps-am install-strip installcheck \
+	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck-am installdirs installdirs-am maintainer-clean \
+	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall-am
+	tags tags-am uninstall uninstall-am
 
 .PRECIOUS: Makefile
 

ac/ar-lib

@@ -2,9 +2,9 @@
 # Wrapper for Microsoft lib.exe
 
 me=ar-lib
-scriptversion=2012-03-01.08; # UTC
+scriptversion=2019-07-04.01; # UTC
 
-# Copyright (C) 2010-2018 Free Software Foundation, Inc.
+# Copyright (C) 2010-2020 Free Software Foundation, Inc.
 # Written by Peter Rosin <peda@lysator.liu.se>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -53,7 +53,7 @@ func_file_conv ()
 	  MINGW*)
 	    file_conv=mingw
 	    ;;
-	  CYGWIN*)
+	  CYGWIN* | MSYS*)
 	    file_conv=cygwin
 	    ;;
 	  *)
@@ -65,7 +65,7 @@ func_file_conv ()
 	mingw)
 	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
 	  ;;
-	cygwin)
+	cygwin | msys)
 	  file=`cygpath -m "$file" || echo "$file"`
 	  ;;
 	wine)
@@ -224,7 +224,8 @@ elif test -n "$extract"; then
       esac
     done
   else
-    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    $AR -NOLOGO -LIST "$archive" | tr -d '\r' | sed -e 's/\\/\\\\/g' \
+      | while read member
         do
           $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
         done

ac/compile

@@ -3,7 +3,7 @@
 
 scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -53,7 +53,7 @@ func_file_conv ()
 	  MINGW*)
 	    file_conv=mingw
 	    ;;
-	  CYGWIN*)
+	  CYGWIN* | MSYS*)
 	    file_conv=cygwin
 	    ;;
 	  *)
@@ -67,7 +67,7 @@ func_file_conv ()
 	mingw/*)
 	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
 	  ;;
-	cygwin/*)
+	cygwin/* | msys/*)
 	  file=`cygpath -m "$file" || echo "$file"`
 	  ;;
 	wine/*)

ac/config.guess

@@ -2,7 +2,7 @@
 # Attempt to guess a canonical system name.
 #   Copyright 1992-2018 Free Software Foundation, Inc.
 
-timestamp='2018-02-24'
+timestamp='2018-08-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -84,8 +84,6 @@ if test $# != 0; then
   exit 1
 fi
 
-trap 'exit 1' 1 2 15
-
 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a
 # compiler to aid in system detection is discouraged as it requires
 # temporary files to be created and, as you can see below, it is a
@@ -96,34 +94,39 @@ trap 'exit 1' 1 2 15
 
 # Portable tmp directory creation inspired by the Autoconf team.
 
-set_cc_for_build='
+tmp=
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+# shellcheck disable=SC2172
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+trap 'test -z "$tmp" || rm -fr "$tmp"' 1 2 13 15
-: ${TMPDIR=/tmp} ;
+trap 'exitcode=$?; test -z "$tmp" || rm -fr "$tmp"; exit $exitcode' 0
+
+set_cc_for_build() {
+    : "${TMPDIR=/tmp}"
+    # shellcheck disable=SC2039
     { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+	{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+	{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+	{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
-dummy=$tmp/dummy ;
+    dummy=$tmp/dummy
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+    case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
-case $CC_FOR_BUILD,$HOST_CC,$CC in
+	,,)    echo "int x;" > "$dummy.c"
- ,,)    echo "int x;" > "$dummy.c" ;
+	       for driver in cc gcc c89 c99 ; do
-	for c in cc gcc c89 c99 ; do
+		   if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
-	  if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+		       CC_FOR_BUILD="$driver"
-	     CC_FOR_BUILD="$c"; break ;
+		       break
-	  fi ;
+		   fi
-	done ;
+	       done
 	       if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
+		   CC_FOR_BUILD=no_compiler_found
 	       fi
 	       ;;
 	,,*)   CC_FOR_BUILD=$CC ;;
 	,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
+    esac
+}
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+if test -f /.attbin/uname ; then
 	PATH=$PATH:/.attbin ; export PATH
 fi
 
@@ -138,7 +141,7 @@ Linux|GNU|GNU/*)
 	# We could probably try harder.
 	LIBC=gnu
 
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	cat <<-EOF > "$dummy.c"
 	#include <features.h>
 	#if defined(__UCLIBC__)
@@ -199,7 +202,7 @@ case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
 		os=netbsdelf
 		;;
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval "$set_cc_for_build"
+		set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
 			| grep -q __ELF__
 		then
@@ -237,7 +240,7 @@ case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "$machine-${os}${release}${abi}"
+	echo "$machine-${os}${release}${abi-}"
 	exit ;;
     *:Bitrig:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -389,20 +392,15 @@ case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
 	echo i386-pc-auroraux"$UNAME_RELEASE"
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval "$set_cc_for_build"
+	UNAME_REL="`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
-	SUN_ARCH=i386
+	case `isainfo -b` in
-	# If there is a compiler, see if it is configured for 64-bit objects.
+	    32)
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+		echo i386-pc-solaris2"$UNAME_REL"
-	# This test works for both compilers.
+		;;
-	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	    64)
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		echo x86_64-pc-solaris2"$UNAME_REL"
-		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		;;
-		grep IS_64BIT_ARCH >/dev/null
+	esac
-	    then
-		SUN_ARCH=x86_64
-	    fi
-	fi
-	echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -482,7 +480,7 @@ case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
 	echo clipper-intergraph-clix"$UNAME_RELEASE"
 	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	sed 's/^	//' << EOF > "$dummy.c"
 #ifdef __cplusplus
 #include <stdio.h>  /* for printf() prototype */
@@ -579,7 +577,7 @@ EOF
 	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval "$set_cc_for_build"
+		set_cc_for_build
 		sed 's/^		//' << EOF > "$dummy.c"
 		#include <sys/systemcfg.h>
 
@@ -660,7 +658,7 @@ EOF
 		    esac
 		fi
 		if [ "$HP_ARCH" = "" ]; then
-		    eval "$set_cc_for_build"
+		    set_cc_for_build
 		    sed 's/^		//' << EOF > "$dummy.c"
 
 		#define _HPUX_SOURCE
@@ -700,7 +698,7 @@ EOF
 	esac
 	if [ "$HP_ARCH" = hppa2.0w ]
 	then
-	    eval "$set_cc_for_build"
+	    set_cc_for_build
 
 	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
 	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
@@ -726,7 +724,7 @@ EOF
 	echo ia64-hp-hpux"$HPUX_REV"
 	exit ;;
     3050*:HI-UX:*:*)
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	sed 's/^	//' << EOF > "$dummy.c"
 	#include <unistd.h>
 	int
@@ -840,6 +838,17 @@ EOF
     *:BSD/OS:*:*)
 	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
 	exit ;;
+    arm:FreeBSD:*:*)
+	UNAME_PROCESSOR=`uname -p`
+	set_cc_for_build
+	if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_PCS_VFP
+	then
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi
+	else
+	    echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf
+	fi
+	exit ;;
     *:FreeBSD:*:*)
 	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	case "$UNAME_PROCESSOR" in
@@ -894,8 +903,8 @@ EOF
 	# other systems with GNU libc and userland
 	echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
 	exit ;;
-    i*86:Minix:*:*)
+    *:Minix:*:*)
-	echo "$UNAME_MACHINE"-pc-minix
+	echo "$UNAME_MACHINE"-unknown-minix
 	exit ;;
     aarch64:Linux:*:*)
 	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
@@ -922,7 +931,7 @@ EOF
 	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
 	exit ;;
     arm*:Linux:*:*)
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
@@ -971,7 +980,7 @@ EOF
 	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	sed 's/^	//' << EOF > "$dummy.c"
 	#undef CPU
 	#undef ${UNAME_MACHINE}
@@ -1046,11 +1055,7 @@ EOF
 	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
 	exit ;;
     x86_64:Linux:*:*)
-	if objdump -f /bin/sh | grep -q elf32-x86-64; then
-	    echo "$UNAME_MACHINE"-pc-linux-"$LIBC"x32
-	else
 	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
-	fi
 	exit ;;
     xtensa*:Linux:*:*)
 	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
@@ -1289,7 +1294,7 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	eval "$set_cc_for_build"
+	set_cc_for_build
 	if test "$UNAME_PROCESSOR" = unknown ; then
 	    UNAME_PROCESSOR=powerpc
 	fi
@@ -1362,6 +1367,7 @@ EOF
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
 	# operating systems.
+	# shellcheck disable=SC2154
 	if test "$cputype" = 386; then
 	    UNAME_MACHINE=i386
 	else
@@ -1473,7 +1479,7 @@ EOF
 exit 1
 
 # Local variables:
-# eval: (add-hook 'write-file-functions 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
 # time-stamp-start: "timestamp='"
 # time-stamp-format: "%:y-%02m-%02d"
 # time-stamp-end: "'"

ac/depcomp

@@ -3,7 +3,7 @@
 
 scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by

ac/install-sh

@@ -451,7 +451,18 @@ do
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 
     # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+    (umask $cp_umask &&
+     { test -z "$stripcmd" || {
+	 # Create $dsttmp read-write so that cp doesn't create it read-only,
+	 # which would cause strip to fail.
+	 if test -z "$doit"; then
+	   : >"$dsttmp" # No need to fork-exec 'touch'.
+	 else
+	   $doit touch "$dsttmp"
+	 fi
+       }
+     } &&
+     $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #

ac/ltmain.sh

@@ -31,7 +31,7 @@
 
 PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.4.6 Debian-2.4.6-9"
+VERSION=2.4.6
 package_revision=2.4.6
 
 
@@ -1370,7 +1370,7 @@ func_lt_ver ()
 #! /bin/sh
 
 # Set a version string for this script.
-scriptversion=2015-10-07.11; # UTC
+scriptversion=2014-01-07.03; # UTC
 
 # A portable, pluggable option parser for Bourne shell.
 # Written by Gary V. Vaughan, 2010
@@ -1530,8 +1530,6 @@ func_run_hooks ()
 {
     $debug_cmd
 
-    _G_rc_run_hooks=false
-
     case " $hookable_fns " in
       *" $1 "*) ;;
       *) func_fatal_error "'$1' does not support hook funcions.n" ;;
@@ -1540,16 +1538,16 @@ func_run_hooks ()
     eval _G_hook_fns=\$$1_hooks; shift
 
     for _G_hook in $_G_hook_fns; do
-      if eval $_G_hook '"$@"'; then
+      eval $_G_hook '"$@"'
+
       # store returned options list back into positional
       # parameters for next 'cmd' execution.
       eval _G_hook_result=\$${_G_hook}_result
       eval set dummy "$_G_hook_result"; shift
-        _G_rc_run_hooks=:
-      fi
     done
 
-    $_G_rc_run_hooks && func_run_hooks_result=$_G_hook_result
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
 }
 
 
@@ -1559,16 +1557,10 @@ func_run_hooks ()
 ## --------------- ##
 
 # In order to add your own option parsing hooks, you must accept the
-# full positional parameter list in your hook function, you may remove/edit
+# full positional parameter list in your hook function, remove any
-# any options that you action, and then pass back the remaining unprocessed
+# options that you action, and then pass back the remaining unprocessed
 # options in '<hooked_function_name>_result', escaped suitably for
-# 'eval'.  In this case you also must return $EXIT_SUCCESS to let the
+# 'eval'.  Like this:
-# hook's caller know that it should pay attention to
-# '<hooked_function_name>_result'.  Returning $EXIT_FAILURE signalizes that
-# arguments are left untouched by the hook and therefore caller will ignore the
-# result variable.
-#
-# Like this:
 #
 #    my_options_prep ()
 #    {
@@ -1578,11 +1570,9 @@ func_run_hooks ()
 #        usage_message=$usage_message'
 #      -s, --silent       don'\''t print informational messages
 #    '
-#        # No change in '$@' (ignored completely by this hook).  There is
+#
-#        # no need to do the equivalent (but slower) action:
+#        func_quote_for_eval ${1+"$@"}
-#        # func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
-#        # my_options_prep_result=$func_quote_for_eval_result
-#        false
 #    }
 #    func_add_hook func_options_prep my_options_prep
 #
@@ -1591,37 +1581,25 @@ func_run_hooks ()
 #    {
 #        $debug_cmd
 #
-#        args_changed=false
-#
 #        # Note that for efficiency, we parse as many options as we can
 #        # recognise in a loop before passing the remainder back to the
 #        # caller on the first unrecognised argument we encounter.
 #        while test $# -gt 0; do
 #          opt=$1; shift
 #          case $opt in
-#            --silent|-s) opt_silent=:
+#            --silent|-s) opt_silent=: ;;
-#                         args_changed=:
-#                         ;;
 #            # Separate non-argument short options:
 #            -s*)         func_split_short_opt "$_G_opt"
 #                         set dummy "$func_split_short_opt_name" \
 #                             "-$func_split_short_opt_arg" ${1+"$@"}
 #                         shift
-#                         args_changed=:
 #                         ;;
-#            *)           # Make sure the first unrecognised option "$_G_opt"
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
-#                         # is added back to "$@", we could need that later
-#                         # if $args_changed is true.
-#                         set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
 #          esac
 #        done
 #
-#        if $args_changed; then
 #        func_quote_for_eval ${1+"$@"}
 #        my_silent_option_result=$func_quote_for_eval_result
-#        fi
-#
-#        $args_changed
 #    }
 #    func_add_hook func_parse_options my_silent_option
 #
@@ -1633,32 +1611,16 @@ func_run_hooks ()
 #        $opt_silent && $opt_verbose && func_fatal_help "\
 #    '--silent' and '--verbose' options are mutually exclusive."
 #
-#        false
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
 #    }
 #    func_add_hook func_validate_options my_option_validation
 #
-# You'll also need to manually amend $usage_message to reflect the extra
+# You'll alse need to manually amend $usage_message to reflect the extra
 # options you parse.  It's preferable to append if you can, so that
 # multiple option parsing hooks can be added safely.
 
 
-# func_options_finish [ARG]...
-# ----------------------------
-# Finishing the option parse loop (call 'func_options' hooks ATM).
-func_options_finish ()
-{
-    $debug_cmd
-
-    _G_func_options_finish_exit=false
-    if func_run_hooks func_options ${1+"$@"}; then
-      func_options_finish_result=$func_run_hooks_result
-      _G_func_options_finish_exit=:
-    fi
-
-    $_G_func_options_finish_exit
-}
-
-
 # func_options [ARG]...
 # ---------------------
 # All the functions called inside func_options are hookable. See the
@@ -1668,28 +1630,17 @@ func_options ()
 {
     $debug_cmd
 
-    _G_rc_options=false
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
 
-    for my_func in options_prep parse_options validate_options options_finish
+    eval func_run_hooks func_options \
-    do
+        ${func_validate_options_result+"$func_validate_options_result"}
-      if eval func_$my_func '${1+"$@"}'; then
-        eval _G_res_var='$'"func_${my_func}_result"
-        eval set dummy "$_G_res_var" ; shift
-        _G_rc_options=:
-      fi
-    done
 
-    # Save modified positional parameters for caller.  As a top-level
+    # save modified positional parameters for caller
-    # options-parser function we always need to set the 'func_options_result'
+    func_options_result=$func_run_hooks_result
-    # variable (regardless the $_G_rc_options value).
-    if $_G_rc_options; then
-      func_options_result=$_G_res_var
-    else
-      func_quote_for_eval ${1+"$@"}
-      func_options_result=$func_quote_for_eval_result
-    fi
-
-    $_G_rc_options
 }
 
 
@@ -1698,9 +1649,9 @@ func_options ()
 # All initialisations required before starting the option parse loop.
 # Note that when calling hook functions, we pass through the list of
 # positional parameters.  If a hook function modifies that list, and
-# needs to propagate that back to rest of this script, then the complete
+# needs to propogate that back to rest of this script, then the complete
 # modified list must be put in 'func_run_hooks_result' before
-# returning $EXIT_SUCCESS (otherwise $EXIT_FAILURE is returned).
+# returning.
 func_hookable func_options_prep
 func_options_prep ()
 {
@@ -1710,14 +1661,10 @@ func_options_prep ()
     opt_verbose=false
     opt_warning_types=
 
-    _G_rc_options_prep=false
+    func_run_hooks func_options_prep ${1+"$@"}
-    if func_run_hooks func_options_prep ${1+"$@"}; then
+
-      _G_rc_options_prep=:
     # save modified positional parameters for caller
     func_options_prep_result=$func_run_hooks_result
-    fi
-
-    $_G_rc_options_prep
 }
 
 
@@ -1731,20 +1678,18 @@ func_parse_options ()
 
     func_parse_options_result=
 
-    _G_rc_parse_options=false
     # this just eases exit handling
     while test $# -gt 0; do
       # Defer to hook functions for initial option parsing, so they
       # get priority in the event of reusing an option name.
-      if func_run_hooks func_parse_options ${1+"$@"}; then
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
       eval set dummy "$func_run_hooks_result"; shift
-        _G_rc_parse_options=:
-      fi
 
       # Break out of the loop if we already parsed every option.
       test $# -gt 0 || break
 
-      _G_match_parse_options=:
       _G_opt=$1
       shift
       case $_G_opt in
@@ -1759,10 +1704,7 @@ func_parse_options ()
 		      ;;
 
         --warnings|--warning|-W)
-                      if test $# = 0 && func_missing_arg $_G_opt; then
+                      test $# = 0 && func_missing_arg $_G_opt && break
-                        _G_rc_parse_options=:
-                        break
-                      fi
                       case " $warning_categories $1" in
                         *" $1 "*)
                           # trailing space prevents matching last $1 above
@@ -1815,25 +1757,15 @@ func_parse_options ()
                       shift
                       ;;
 
-        --)           _G_rc_parse_options=: ; break ;;
+        --)           break ;;
         -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
-        *)            set dummy "$_G_opt" ${1+"$@"}; shift
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
-                      _G_match_parse_options=false
-                      break
-                      ;;
       esac
-
-      $_G_match_parse_options && _G_rc_parse_options=:
     done
 
-
-    if $_G_rc_parse_options; then
     # save modified positional parameters for caller
     func_quote_for_eval ${1+"$@"}
     func_parse_options_result=$func_quote_for_eval_result
-    fi
-
-    $_G_rc_parse_options
 }
 
 
@@ -1846,21 +1778,16 @@ func_validate_options ()
 {
     $debug_cmd
 
-    _G_rc_validate_options=false
-
     # Display all warnings if -W was not given.
     test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
 
-    if func_run_hooks func_validate_options ${1+"$@"}; then
+    func_run_hooks func_validate_options ${1+"$@"}
-      # save modified positional parameters for caller
-      func_validate_options_result=$func_run_hooks_result
-      _G_rc_validate_options=:
-    fi
 
     # Bail if the options were screwed!
     $exit_cmd $EXIT_FAILURE
 
-    $_G_rc_validate_options
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
 }
 
 
@@ -2141,12 +2068,12 @@ include the following information:
        compiler:       $LTCC
        compiler flags: $LTCFLAGS
        linker:         $LD (gnu? $with_gnu_ld)
-       version:        $progname $scriptversion Debian-2.4.6-9
+       version:        $progname (GNU libtool) 2.4.6
        automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
        autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
 
 Report bugs to <bug-libtool@gnu.org>.
-GNU libtool home page: <http://www.gnu.org/s/libtool/>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
 General help using GNU software: <http://www.gnu.org/gethelp/>."
     exit 0
 }
@@ -2197,7 +2124,7 @@ fi
 # a configuration failure hint, and exit.
 func_fatal_configuration ()
 {
-    func__fatal_error ${1+"$@"} \
+    func_fatal_error ${1+"$@"} \
       "See the $PACKAGE documentation for more information." \
       "Fatal configuration error."
 }
@@ -2343,8 +2270,6 @@ libtool_options_prep ()
     nonopt=
     preserve_args=
 
-    _G_rc_lt_options_prep=:
-
     # Shorthand for --mode=foo, only valid as the first argument
     case $1 in
     clean|clea|cle|cl)
@@ -2368,18 +2293,11 @@ libtool_options_prep ()
     uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
       shift; set dummy --mode uninstall ${1+"$@"}; shift
       ;;
-    *)
-      _G_rc_lt_options_prep=false
-      ;;
     esac
 
-    if $_G_rc_lt_options_prep; then
     # Pass back the list of options.
     func_quote_for_eval ${1+"$@"}
     libtool_options_prep_result=$func_quote_for_eval_result
-    fi
-
-    $_G_rc_lt_options_prep
 }
 func_add_hook func_options_prep libtool_options_prep
 
@@ -2391,12 +2309,9 @@ libtool_parse_options ()
 {
     $debug_cmd
 
-    _G_rc_lt_parse_options=false
-
     # Perform our own loop to consume as many options as possible in
     # each iteration.
     while test $# -gt 0; do
-      _G_match_lt_parse_options=:
       _G_opt=$1
       shift
       case $_G_opt in
@@ -2472,21 +2387,14 @@ libtool_parse_options ()
                         ;;
 
 	# An option not handled by this hook function:
-        *)              set dummy "$_G_opt" ${1+"$@"} ; shift
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
-                        _G_match_lt_parse_options=false
-                        break
-                        ;;
       esac
-      $_G_match_lt_parse_options && _G_rc_lt_parse_options=:
     done
 
-    if $_G_rc_lt_parse_options; then
+
     # save modified positional parameters for caller
     func_quote_for_eval ${1+"$@"}
     libtool_parse_options_result=$func_quote_for_eval_result
-    fi
-
-    $_G_rc_lt_parse_options
 }
 func_add_hook func_parse_options libtool_parse_options
 
@@ -7366,12 +7274,10 @@ func_mode_link ()
       # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
       # -specs=*             GCC specs files
       # -stdlib=*            select c++ std lib with clang
-      # -fsanitize=*         Clang/GCC memory and address sanitizer
-      # -fuse-ld=*           Linker select flags for GCC
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
       -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
       -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \
-      -specs=*|-fsanitize=*|-fuse-ld=*)
+      -specs=*)
         func_quote_for_eval "$arg"
 	arg=$func_quote_for_eval_result
         func_append compile_command " $arg"
@@ -7664,10 +7570,7 @@ func_mode_link ()
 	case $pass in
 	dlopen) libs=$dlfiles ;;
 	dlpreopen) libs=$dlprefiles ;;
-	link)
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
 	esac
       fi
       if test lib,dlpreopen = "$linkmode,$pass"; then
@@ -7986,6 +7889,9 @@ func_mode_link ()
 	    # It is a libtool convenience library, so add in its objects.
 	    func_append convenience " $ladir/$objdir/$old_library"
 	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    deplibs="$deplib $deplibs"
@@ -7996,9 +7902,6 @@ func_mode_link ()
 	    fi
 	    func_append tmp_libs " $deplib"
 	  done
-	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
-	    func_fatal_error "'$lib' is not a convenience library"
-	  fi
 	  continue
 	fi # $pass = conv
 
@@ -8922,9 +8825,6 @@ func_mode_link ()
 	    revision=$number_minor
 	    lt_irix_increment=no
 	    ;;
-	  *)
-	    func_fatal_configuration "$modename: unknown library version type '$version_type'"
-	    ;;
 	  esac
 	  ;;
 	no)

ac/missing

@@ -3,7 +3,7 @@
 
 scriptversion=2018-03-07.03; # UTC
 
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify

aclocal.m4

@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.16.2 -*- Autoconf -*-
 
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@ You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
-# Copyright (C) 2002-2018 Free Software Foundation, Inc.
+# Copyright (C) 2002-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -35,7 +35,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.16'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.16.1], [],
+m4_if([$1], [1.16.2], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -51,12 +51,12 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.16.1])dnl
+[AM_AUTOMAKE_VERSION([1.16.2])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
-# Copyright (C) 2011-2018 Free Software Foundation, Inc.
+# Copyright (C) 2011-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -118,7 +118,7 @@ AC_SUBST([AR])dnl
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -170,7 +170,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+# Copyright (C) 1997-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -201,7 +201,7 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -392,7 +392,7 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -431,7 +431,9 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
   done
   if test $am_rc -ne 0; then
     AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
-    for automatic dependency tracking.  Try re-running configure with the
+    for automatic dependency tracking.  If GNU make was not used, consider
+    re-running the configure script with MAKE="gmake" (or whatever is
+    necessary).  You can also try re-running configure with the
     '--disable-dependency-tracking' option to at least be able to build
     the package (albeit without support for automatic dependency tracking).])
   fi
@@ -458,7 +460,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -655,7 +657,7 @@ for _am_header in $config_headers :; do
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -676,7 +678,7 @@ if test x"${install_sh+set}" != xset; then
 fi
 AC_SUBST([install_sh])])
 
-# Copyright (C) 2003-2018 Free Software Foundation, Inc.
+# Copyright (C) 2003-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -697,7 +699,7 @@ AC_SUBST([am__leading_dot])])
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -740,7 +742,7 @@ AC_SUBST([am__quote])])
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+# Copyright (C) 1997-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -779,7 +781,7 @@ fi
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -808,7 +810,7 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -855,7 +857,7 @@ AC_LANG_POP([C])])
 # For backward compatibility.
 AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -874,7 +876,7 @@ AC_DEFUN([AM_RUN_LOG],
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -955,7 +957,7 @@ AC_CONFIG_COMMANDS_PRE(
 rm -f conftest.file
 ])
 
-# Copyright (C) 2009-2018 Free Software Foundation, Inc.
+# Copyright (C) 2009-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1015,7 +1017,7 @@ AC_SUBST([AM_BACKSLASH])dnl
 _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
 ])
 
-# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+# Copyright (C) 2001-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1043,7 +1045,7 @@ fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+# Copyright (C) 2006-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1062,7 +1064,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2018 Free Software Foundation, Inc.
+# Copyright (C) 2004-2020 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

bin/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

configure

@@ -6437,7 +6437,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
+netbsd*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
@@ -7300,8 +7300,11 @@ _LT_EOF
   test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
-    if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -10126,9 +10129,6 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
-  linux* | k*bsd*-gnu | gnu*)
-    link_all_deplibs=no
-    ;;
   esac
 
   ld_shlibs=yes
@@ -10383,7 +10383,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -11053,7 +11053,6 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
 	if test yes = "$lt_cv_irix_exported_symbol"; then
           archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
-	link_all_deplibs=no
       else
 	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
@@ -11075,7 +11074,7 @@ $as_echo "$lt_cv_irix_exported_symbol" >&6; }
       esac
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -12170,6 +12169,9 @@ fi
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Ideally, we could use ldconfig to report *all* directores which are
   # searched for libraries, however this is still not possible.  Aside from not
   # being certain /sbin/ldconfig is available, command
@@ -12178,7 +12180,7 @@ fi
   # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -12190,18 +12192,6 @@ fi
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -17380,7 +17370,7 @@ HCL_PROJECT_AUTHOR="${PACKAGE_BUGREPORT}"
 HCL_PROJECT_URL="${PACKAGE_URL}"
 
 
-ac_config_files="$ac_config_files Makefile lib/Makefile mod/Makefile bin/Makefile"
+ac_config_files="$ac_config_files Makefile lib/Makefile mod/Makefile bin/Makefile t/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -18431,6 +18421,7 @@ do
     "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
     "mod/Makefile") CONFIG_FILES="$CONFIG_FILES mod/Makefile" ;;
     "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;;
+    "t/Makefile") CONFIG_FILES="$CONFIG_FILES t/Makefile" ;;
 
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
@@ -19108,7 +19099,9 @@ $as_echo X/"$am_mf" |
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Something went wrong bootstrapping makefile fragments
-    for automatic dependency tracking.  Try re-running configure with the
+    for automatic dependency tracking.  If GNU make was not used, consider
+    re-running the configure script with MAKE=\"gmake\" (or whatever is
+    necessary).  You can also try re-running configure with the
     '--disable-dependency-tracking' option to at least be able to build
     the package (albeit without support for automatic dependency tracking).
 See \`config.log' for more details" "$LINENO" 5; }
@@ -19135,6 +19128,7 @@ See \`config.log' for more details" "$LINENO" 5; }
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
 # Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 
 # Provide generalized library-building support services.

configure.ac

@@ -686,6 +686,7 @@ AC_CONFIG_FILES([
 	lib/Makefile 
 	mod/Makefile 
 	bin/Makefile
+	t/Makefile
 ])
 AC_OUTPUT
 

lib/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -241,8 +241,8 @@ am__pkginclude_HEADERS_DIST = hcl.h hcl-cmn.h hcl-fmt.h hcl-opt.h \
 	hcl-rbt.h hcl-utl.h hcl-xma.h hcl-c.h hcl-s.h hcl-tmr.h \
 	hcl-xutl.h hcl-json.h
 HEADERS = $(pkginclude_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
-	$(LISP)hcl-cfg.h.in
+	hcl-cfg.h.in
 # Read a list of newline-separated strings from the standard input,
 # and print each of them once, without duplicates.  Input order is
 # *not* preserved.

m4/libtool.m4

@@ -728,6 +728,7 @@ _LT_CONFIG_SAVE_COMMANDS([
     cat <<_LT_EOF >> "$cfgfile"
 #! $SHELL
 # Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 
 # Provide generalized library-building support services.
@@ -2866,6 +2867,9 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   # before this can be enabled.
   hardcode_into_libs=yes
 
+  # Add ABI-specific directories to the system library path.
+  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
   # Ideally, we could use ldconfig to report *all* directores which are
   # searched for libraries, however this is still not possible.  Aside from not
   # being certain /sbin/ldconfig is available, command
@@ -2874,7 +2878,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   # appending ld.so.conf contents (and includes) to the search path.
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2886,18 +2890,6 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -3557,7 +3549,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
+netbsd*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
@@ -4063,8 +4055,7 @@ _LT_EOF
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&AS_MESSAGE_LOG_FD
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
-    if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&AS_MESSAGE_LOG_FD && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -4436,7 +4427,7 @@ m4_if([$1], [CXX], [
 	    ;;
 	esac
 	;;
-      netbsd* | netbsdelf*-gnu)
+      netbsd*)
 	;;
       *qnx* | *nto*)
         # QNX uses GNU C++, but need to define -shared option too, otherwise
@@ -4948,9 +4939,6 @@ m4_if([$1], [CXX], [
       ;;
     esac
     ;;
-  linux* | k*bsd*-gnu | gnu*)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-    ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
     ;;
@@ -5013,9 +5001,6 @@ dnl Note also adjust exclude_expsyms for C++ above.
   openbsd* | bitrig*)
     with_gnu_ld=no
     ;;
-  linux* | k*bsd*-gnu | gnu*)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-    ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
@@ -5270,7 +5255,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -5791,7 +5776,6 @@ _LT_EOF
 	if test yes = "$lt_cv_irix_exported_symbol"; then
           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
 	fi
-	_LT_TAGVAR(link_all_deplibs, $1)=no
       else
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
@@ -5813,7 +5797,7 @@ _LT_EOF
       esac
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -6439,7 +6423,7 @@ if test yes != "$_lt_caught_CXX_error"; then
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
     else
       GXX=no
@@ -6814,7 +6798,7 @@ if test yes != "$_lt_caught_CXX_error"; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
             if test yes = "$GXX"; then
@@ -6879,7 +6863,7 @@ if test yes != "$_lt_caught_CXX_error"; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
 	    if test yes = "$GXX"; then
@@ -7218,7 +7202,7 @@ if test yes != "$_lt_caught_CXX_error"; then
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -7302,7 +7286,7 @@ if test yes != "$_lt_caught_CXX_error"; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
 	        # platform.
@@ -7313,7 +7297,7 @@ if test yes != "$_lt_caught_CXX_error"; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'

mod/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,

t/Makefile.am

@@ -0,0 +1,17 @@
+AUTOMAKE_OPTIONS = nostdinc
+
+check_SCRIPTS = \
+	ret-01.hcl \
+	retvar-01.hcl
+
+##noinst_SCRIPTS = $(check_SCRIPTS)
+EXTRA_DIST = $(check_SCRIPTS)
+
+check_PROGRAMS =
+
+
+TESTS = $(check_PROGRAMS) $(check_SCRIPTS)
+
+TEST_EXTENSIONS = .hcl
+HCL_LOG_COMPILER = ../bin/hcl
+AM_HCL_LOG_FLAGS =

t/Makefile.in

@@ -0,0 +1,842 @@
+# Makefile.in generated by automake 1.16.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2020 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS =
+TESTS = $(am__EXEEXT_1) $(check_SCRIPTS)
+subdir = t
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_sign.m4 \
+	$(top_srcdir)/m4/ax_numval.m4 $(top_srcdir)/m4/ax_pthread.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/hcl-cfg.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+am__EXEEXT_1 =
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.hcl.log=.log)
+HCL_LOG_DRIVER = $(SHELL) $(top_srcdir)/ac/test-driver
+HCL_LOG_COMPILE = $(HCL_LOG_COMPILER) $(AM_HCL_LOG_FLAGS) \
+	$(HCL_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/ac/test-driver
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_MODE = @BUILD_MODE@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DL_LIBS = @DL_LIBS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+HCL_PROJECT_AUTHOR = @HCL_PROJECT_AUTHOR@
+HCL_PROJECT_URL = @HCL_PROJECT_URL@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTDL_LIBS = @LTDL_LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
+PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
+PACKAGE_VERSION_PATCH = @PACKAGE_VERSION_PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+QUADMATH_LIBS = @QUADMATH_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+UNICOWS_LIBS = @UNICOWS_LIBS@
+UNWIND_LIBS = @UNWIND_LIBS@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+ax_pthread_config = @ax_pthread_config@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = nostdinc
+check_SCRIPTS = \
+	ret-01.hcl \
+	retvar-01.hcl
+
+EXTRA_DIST = $(check_SCRIPTS)
+TEST_EXTENSIONS = .hcl
+HCL_LOG_COMPILER = ../bin/hcl
+AM_HCL_LOG_FLAGS = 
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .hcl .hcl$(EXEEXT) .log .trs
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign t/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign t/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS: $(check_PROGRAMS) $(check_SCRIPTS)
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.hcl.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(HCL_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_HCL_LOG_DRIVER_FLAGS) $(HCL_LOG_DRIVER_FLAGS) -- $(HCL_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.hcl$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(HCL_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_HCL_LOG_DRIVER_FLAGS) $(HCL_LOG_DRIVER_FLAGS) -- $(HCL_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: all all-am check check-TESTS check-am clean \
+	clean-checkPROGRAMS clean-generic clean-libtool cscopelist-am \
+	ctags-am distclean distclean-generic distclean-libtool distdir \
+	dvi dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am recheck tags-am \
+	uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: